---
title: "How-to articles"
description: "How-to articles of UnderAutomation.Robotics: variables, IO, programs, position, alarms, files, state and moves on Fanuc, Yaskawa, Universal Robots, ABB and Stäubli controllers, one code in C# and Python."
---

# How-to articles

The how-to articles of UnderAutomation.Robotics are organized by task, not by protocol. Each article does one task with one code in C# and Python on the brands that support it, and gives what changes from one brand to another: names of variables and signals, paths of files, settings of the controller.

Each article starts with a support table generated from the route data of the library. A task that a brand does not support is marked "Not available" for this brand.

## Articles

- [Read and write robot variables](/robotics/documentation/how-to-read-write-variables): registers and variables, with the native names of each brand.
- [Read and write robot IO](/robotics/documentation/how-to-read-write-io): read the inputs and write the outputs of the controller.
- [Start, stop and select a robot program](/robotics/documentation/how-to-run-program): run a program from a PC and read its execution.
- [Get the current position of a robot](/robotics/documentation/how-to-get-position): Cartesian pose and joints, in mm and degrees.
- [Read and reset robot alarms](/robotics/documentation/how-to-read-reset-alarms): active alarms, history and reset.
- [Transfer files to and from a robot controller](/robotics/documentation/how-to-transfer-files): list, download and upload, with the paths of each brand.
- [Monitor the state of a robot controller](/robotics/documentation/how-to-monitor-state): operating mode, servo power, execution and alarm state of a cell.
- [Move a robot from a PC](/robotics/documentation/how-to-move-robot): joint and linear moves, with the settings of each controller.

## What to read next

- [Connect to your robot](/robotics/documentation/connect): the connection parameters of each brand.
- [Which protocol for which task](/robotics/documentation/which-protocol-for-which-task): what each route needs on the controller.
- [Errors](/robotics/documentation/errors): the exceptions of the common API.