This page explains the inventory of TouchUp: the list of every controller it has connected to, with its model, its serial number and its software version. It is built by TouchUp alone, at each connection, without any action of the user.

## Open the inventory

Run `TouchUp: Open Inventory`. The panel lists one row per controller.

![The inventory of the controllers seen by TouchUp.](/touchup/documentation/screenshots/inventory.png)

| Column | Content |
| --- | --- |
| Name, Brand, Address | As declared in TouchUp |
| Model | The model of the controller, read at connect |
| Serial | The serial number of the controller |
| Software | The software or firmware version |
| Groups | The motion groups of the controller |
| Connections | The number of connections |
| First seen, Last seen | The date of the first and of the last connection |

`Refresh` reads the list again. Before any controller is connected, the panel says "No controller connected yet: connect one in the Controllers view."

## Export to CSV

`Export CSV` writes the inventory to a CSV file, for a maintenance report or a spreadsheet of the plant.

## What to read next

- [Status and status bar](/touchup/documentation/status)
- [Back up a controller](/touchup/documentation/backup)