このページは英語でのみ提供されています。
How-to articles
How-to articles of UnderAutomation.Robotics: variables, IO, programs, position, alarms, files, state and moves on Fanuc, Yaskawa, Universal Robots, ABB and Stäubli controllers, one code in C# and Python.
The how-to articles of UnderAutomation.Robotics are organized by task, not by protocol. Each article does one task with one code in C# and Python on the brands that support it, and gives what changes from one brand to another: names of variables and signals, paths of files, settings of the controller.
Each article starts with a support table generated from the route data of the library. A task that a brand does not support is marked "Not available" for this brand.
Articles
- Read and write robot variables: registers and variables, with the native names of each brand.
- Read and write robot IO: read the inputs and write the outputs of the controller.
- Start, stop and select a robot program: run a program from a PC and read its execution.
- Get the current position of a robot: Cartesian pose and joints, in mm and degrees.
- Read and reset robot alarms: active alarms, history and reset.
- Transfer files to and from a robot controller: list, download and upload, with the paths of each brand.
- Monitor the state of a robot controller: operating mode, servo power, execution and alarm state of a cell.
- Move a robot from a PC: joint and linear moves, with the settings of each controller.
What to read next
- Connect to your robot: the connection parameters of each brand.
- Which protocol for which task: what each route needs on the controller.
- Errors: the exceptions of the common API.